Negative-acknowledge character
From Wikipedia, the free encyclopedia
(Redirected from Negative acknowledge character)
"Nak" and "NAK" redirect here. For other uses, see Nak (disambiguation).
- In telecommunications, a negative-acknowledge character (NAK) is a transmission control character sent by a station as a negative response to the station with which the connection has been set up.
- In Binary Synchronous Communications protocol, the NAK is used to indicate that an error was detected in the previously received block and that the receiver is ready to accept retransmission of that block.
- In multipoint systems, the NAK is used as the not-ready reply to a poll.
- Also used as a slang abbreviation in internet forums and chats (mainly technology) for "I don't agree" or "That's wrong".[1]
- In the ASCII code, the NAK character is 0x15 (hexadecimal).
[edit] See also
[edit] References
This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).
| This computer science article is a stub. You can help Wikipedia by expanding it. |

